provided by Star2Billing S.L.

I'have one quintum AFG800 , for get this hardware working fine with A2B you need to configure one card per port, so you have 8 cards creates and each one configured por FXS port of the Quintum.

Anyone have a hack to make for example, the first card related to the first port can see all other cards configured in the rest of the hard.


In spanish:

Hay alguna posibilidad de que un usuario a traves de la interface de cliente, pueda ver su reporte y el de 7 usuarios mas, supongo que deberia de haber una manera de relacionarlos.

Cheers.

Have you tried searching on a Quintum forum?

i think you have to setup cli per port and use CLI authorization.

JustMe the already searched in Quintum support site.
mohan76 can you talk a little more or give me a litle example?
I'have one account already setup for port, but i'need use one to see the cdr for all ports, not one user for port to see the cdr.

Added after 23 minutes:

i think that hace to work for me
http://forum.a2billing.net/viewtopic.ph ... =cidenable

example:
quintum 8 fxs ports
set one card for port (to recieve calls)

and then

[quintumport1]
type=peer
host=192.168.52.221
canreinvite=no
qualify=yes
deny=0.0.0.0/0.0.0.0
context=a2billing
accountcode=123456 (card number)

[quintumport2]
type=peer
host=192.168.52.221
canreinvite=no
qualify=yes
deny=0.0.0.0/0.0.0.0
context=a2billing
accountcode=123456 (card number)

but in this case, i'have the same accountcode and the question is, the accountcode is the card? if the accountcode is diferent is the same.
Any advise or any example, what is "CLI authorization" or how to configure?
thx.

use for IP authorition. for this u must have fixed ip

all call generated from IP 192.168.52.221 will use card number 123456
thats mean all 8 port will use card number 123456

ok, this is solved now, in my case i'need to setup one sip user for quintum port, one customer is created and the the 8 port have one sip account configurated for port, but every port have the same accountcode in additional_a2billing_sip.conf, so with the customer can see the 8 ports in the customer ui.
Thx for the help guys.