Hi All, I've setup A2B 1.3 on Trixbox and so far so good.
I've setup DID and add 2 destinations for a given DID, so it will try the first one: a SIP device, and if the SIP device doesn't answer or is busy it goes to a standard PSTN number (follow me trick), however when I looked at the card invoice, there's no charge for the call from A2B to the PSTN number, even so it did cost me some money...
I can see the CDR in the card invoice but no charges applied, I did setup a rate for this destination...
Any ideas?
Added after 3 minutes:
SOLVED:
I setup the DID as free, if I set with dialout rate only it works, Sorry for this
|