provided by Star2Billing S.L.

Hi!
I need to distribute traffic through 2 (or more) trunks with the same rate.
In Asterisk Dialplan i can do it as: (simplified)

exten => _1.,Set(TrunkName=${RAND(1,2)})
exten => _1.,Dial(SIP/ ${TrunkName}/${EXTEN})
exten => _1.,Hungup()

But in A2Billing which trunk i have to define for rate or ratecard ?

A2B 1.9.3
Asterisk 1.6

Hi

If these are for VoIP customers, and you have DNID set to yes, you could modify the number to dial in the asterisk dial-plan before sending the call into A2Billing.

e.g. prefix 881 onto the number to use trunk 1, and have a set of rates all prefixed with 881, and remove the 881 in the trunk, then for the second trunk, have an identical set of rates, this time prefixed with 882, which calls the second trunk.

Joe

Thanks.
Understood