asterisk2billing.org http://forum.asterisk2billing.org/ |
|
Need of help about of call between extension in A2BILLING http://forum.asterisk2billing.org/viewtopic.php?f=14&t=10600 |
Page 1 of 1 |
Author: | linuxciscodaniel [ Fri Nov 15, 2013 8:24 am ] |
Post subject: | Need of help about of call between extension in A2BILLING |
Hello, i have need to do the call between extension a2billing then i have configurate a DID destination with destination1=SIP/1306687772@IP and destination2=SIP/0157432639@IP but from 0157432639 i can't reach 1306687772 when i try to call i receive this message in my log Spawn extension (did, 1306687772, 1) exited non-zero on 'SIP/212.83.132.111-0000001b' == Everyone is busy/congested at this time (1:1/0/0) == Spawn extension (a2billing, 1306687772, 1) exited non-zero on 'SIP/0157432639-00000019' somebody can tell were the bad config please ?? |
Author: | jroper [ Mon Nov 18, 2013 12:46 pm ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
Hi In A2Billing you can call from one DID to another, so if you have a DID of 0157432639 and a DID destination of SIP/0157432639@IP, and if another customer calls 0157432639, then the call will be routed internally. If it's not ringing at the other end, then check the endpoint and do some SIP traces. Joe |
Author: | linuxciscodaniel [ Tue Nov 19, 2013 10:33 am ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
Hello thanks for you reply jroper i have check all but i don't see the issue in my endpoint, i think that i have a problem with the context, because all my extension have the extension a2BILLING, i want to known if i must applied the 2 contexts DID context and a2billing context and if it is yes, then how can i do that ?? waiting your reply PLEASE BR |
Author: | jroper [ Tue Nov 19, 2013 10:41 am ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
Hi The DID gets sent into A2Billing as a DID, (...a2billing.php,1,did), while the VoIP call is sent into A2Billing normally (...a2billing.php,1). A2Billing will recognise that the call is to a DID and route to the DID destination. Joe |
Author: | linuxciscodaniel [ Tue Nov 19, 2013 10:54 am ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
Joe i have do that, in my file extension.conf i have this context [did] exten => _X.,1,AGI(a2billing.php,1,did) exten => _X.,2,Hangup but the incoming calls from other extensions don't pass, i don't why i have in the destination SIP/1306687772@IP and SIP/0157432639@IP With IP = server of my A2billing i want to know if my paramaters it is correct?? please Help BR |
Author: | jroper [ Tue Nov 19, 2013 11:00 am ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
Hi The IP should not be the same as your installation of A2Billing, if I understand your comment correctly, it sounds like you are sending the call round in circles. The DID destination should be something like SIP/DID-Number@IP-Address-of-distant-pbx or SIP/account-number Joe |
Author: | linuxciscodaniel [ Tue Nov 19, 2013 11:09 am ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
it is working now, THANKS joe |
Author: | jroper [ Tue Nov 19, 2013 11:16 am ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
Hi For the sake of people following, can you put in a little writeup of what mistake you made, and how you fixed it. Joe |
Author: | linuxciscodaniel [ Tue Nov 19, 2013 2:16 pm ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
Ok, no problem i had put the bad destination i have put SIP/customers number and working but i have another issue when i make a call in my repport i see the Calltype for a one appel DID-ALEG DID_VOIP i want to known why PLEASE BR |
Author: | jroper [ Tue Nov 19, 2013 3:00 pm ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
Hi A DID call has two legs, the part from the caller to A2Billing, and A2Billing to the called party. Joe |
Author: | linuxciscodaniel [ Tue Nov 19, 2013 3:13 pm ] |
Post subject: | Re: Need of help about of call between extension in A2BILLING |
ok, thanks now i have a last question my DID working but i don't see the Caller ID when the call between 2 extension how can i resolv that please BR |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |