Support A2Billing :

provided by Star2Billing S.L.

Support A2Billing :
It is currently Thu Mar 28, 2024 9:09 am
VoIP Billing solution


All times are UTC




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Issue with SIP FRIEND & Calling card
PostPosted: Mon Jul 13, 2009 8:40 am 
Offline

Joined: Mon Jul 06, 2009 8:11 pm
Posts: 23
Dear A2B users/Developers,

I succesfully configured A2B callingcard platform without any issue

Also, I have created a SIP friend & integrated with FreePBX using custom Trunk as mentioned in the link http://forum.asterisk2billing.org/viewtopic.php?f=4&t=2127&hilit=a2b+outnum

Everything works perfectly except one issue

1. If use "use_dnid = NO" in a2billing.conf
NO issue with calling card platform, when the access number is called, it will ask for PIN and then destination number..everything is OK here.
But in the SIP Friend (sip client) when it tries to call a number, it announce the balance and they ask the destination again. Which it should as it should use the dialled number automatically

To resolve this issue,

2. If I change "use_dnid"= yes in a2billing.conf

NO issue with SIP Friend (Sip client) it announce the balance and immediately calls the destination number WITHOUT asking again"please enter the destination number". - it is working as expected.
But in the normal calling card platform, when the access number is dialed, it ask for the PIN and once entered the valid PIN, it will automatically starts calling the dnid.

Note: I use the same "custom-a2billing"context for both callingcard & SIP friend:

[custom-a2billing]
exten => _X.,1,Answer
exten => _X.,n,Wait(1)
exten => _X.,n,DeadAGI(a2billing.php|1)
exten => _X.,n,Hangup


I searched for any workaround to solve this problem, but I couldn't find a FIX, Can you please help in resolving this issue

Your help will be much appreciated

Thanks
Senthil


Top
 Profile  
 
 Post subject: Re: Issue with SIP FRIEND & Calling card -SOLVED
PostPosted: Mon Jul 13, 2009 8:53 am 
Offline

Joined: Mon Jul 06, 2009 8:11 pm
Posts: 23
Issue solved

solution:

I configured two [agi-conf1] (with use_dnid = no) & [agi-conf2] (with use_dnid=yes) and assigned to custom-a2billing.conf & custom-a2billing-sip respectively.

Assigned custom-a2billing.conf for calling card platform
&
custom-a2billing-sip.conf for SIP friend.

Cheers
Senthil


Top
 Profile  
 
 Post subject: Re: Issue with SIP FRIEND & Calling card
PostPosted: Mon Jul 13, 2009 3:07 pm 
Offline
Moderator
User avatar

Joined: Thu Jun 22, 2006 2:19 pm
Posts: 2890
Location: Devon, UK
Good for you!
We all win when folks take the time to document the solution that worked for them.


Top
 Profile  
 
 Post subject: Re: Issue with SIP FRIEND & Calling card
PostPosted: Wed Jul 15, 2009 7:35 pm 
Offline

Joined: Sat Mar 07, 2009 8:18 pm
Posts: 27
Hello senthilarasu or anyone that could help.

I read your post and find out I have the same issues, and follow your instruction, but I'm stack somewhere, where I suppose to assign the agi-conf1 and agi-conf2 assigned to custom-a2billing.conf & custom-a2billing-sip respectively. I'm lost from there, can you please provide me the detail how you did it? Or where to go, I'm just a newbie, so if you can please help, that will be helpful.

Cheers,
malbep


Top
 Profile  
 
 Post subject: Re: Issue with SIP FRIEND & Calling card
PostPosted: Thu Jul 16, 2009 2:08 am 
Offline

Joined: Sat Mar 07, 2009 8:18 pm
Posts: 27
Hello to All,
I'm going just to reformulate my question, how or where to go to assign custom-a2billing.conf for calling card platform and
custom-a2billing-sip.conf for SIP friend. If anybody understanding this, please help, I really need it. I'm in the middle of making this configuration, it been 2 days I'm trying to understand and look for this. So please if you could help.

Malbep


Top
 Profile  
 
 Post subject: Re: Issue with SIP FRIEND & Calling card
PostPosted: Thu Aug 19, 2010 6:02 pm 
Offline

Joined: Tue Jul 20, 2010 10:03 pm
Posts: 4
I'd also be grateful for more detailed explanation, on how to split SIP clients and CARD clients using two agi-conf.

I've already created two agi-conf, but now, the biggest questions is HOW and WHERE to setup these configs.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 
VoIP Billing solution


All times are UTC


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group