Hi there,
Good job with A2billing by the way. It really is an excellant toolset.
I am having a few problems with its setup against Freepbx however. I have installed Asterisk with Freepbx and calls route fine in and out. I then installed A2billing and created a trunk to link the two. That works fine to as when I make a call to my DID, it routes through to Freepbx, then connects to A2billing via and gives me the balance for the accountcode.
That however is when things go a little off-kilter....
It connects to A2billing, asks me to input the number that I want to dial
Then
"The number you have dialed is currently unavailable"
The log file shows the below error:
[2010-02-01 20:24:12] VERBOSE[19414] logger.c: -- <SIP/1000-b7701b70> Playing 'prepaid-enter-dest' (language 'en')
[2010-02-01 20:24:24] VERBOSE[19414] logger.c: a2billing.php|1: file:Class.A2Billing.php - line:683 - RES DTMF : 07780111111
[2010-02-01 20:24:24] VERBOSE[19414] logger.c: a2billing.php|1: file:Class.A2Billing.php - line:701 - DESTINATION ::> 07780111111
[2010-02-01 20:24:24] VERBOSE[19414] logger.c: a2billing.php|1: file:Class.A2Billing.php - line:703 - RULES APPLY ON DESTINATION ::> 07780111111
[2010-02-01 20:24:24] VERBOSE[19414] logger.c: a2billing.php|1: file:Class.A2Billing.php - line:739 - ERROR ::> RateEngine didnt succeed to match the dialed number over the ratecard (Please check : id the ratecard is well create ; if the removeInter_Prefix is set according to your prefix in the ratecard ; if you hooked the ratecard to the Call Plan)
[2010-02-01 20:24:24] VERBOSE[19414] logger.c: -- Playing 'prepaid-dest-unreachable' (escape_digits=#) (sample_offset 0)
My rate card seems to be set up exactly as the guides say, but still no joy.
Any help would be very gratefully accepted
Thanks
BVD