asterisk2billing.org http://forum.asterisk2billing.org/ |
|
A2B 144 not answering DID calls [SOLVED] http://forum.asterisk2billing.org/viewtopic.php?f=15&t=6989 |
Page 1 of 1 |
Author: | RobinA [ Fri Jan 29, 2010 3:24 am ] |
Post subject: | A2B 144 not answering DID calls [SOLVED] |
Hello All, I just upgraded to version 1.4.4.1 and it looks good, however I'm having a few challenges that I'm sure someone could help me with. Calls work fine when sent to a2billing,1 but whenever I send a DID to an extension, here is what happens: Code: [2010-01-28 22:08:20] VERBOSE[13264] logger.c: -- Goto (a2billing-did,1XXX2441026,1) [2010-01-28 22:08:20] VERBOSE[13264] logger.c: -- Executing [1XXX2441026@a2billing-did:1] DeadAGI("SIP/DIDx06-00000017", "a2billing.php|1|did") in new stack [2010-01-28 22:08:20] WARNING[13264] res_agi.c: Running DeadAGI on a live channel will cause problems, please use AGI [2010-01-28 22:08:20] VERBOSE[13264] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php [2010-01-28 22:08:20] VERBOSE[13264] logger.c: -- AGI Script a2billing.php completed, returning 0 Can anyone tell me what's happening here? Thanks, Robin |
Author: | jroper [ Fri Jan 29, 2010 8:20 am ] |
Post subject: | Re: A2B 144 not answering DID calls |
Hi Turn up the verbosity in the output in the agi-conf. Make sure your DID are enabled and have a valid destination, and that the DID delivered by your carrier matches that in Inbound DID in A2Billing exactly Joe |
Author: | RobinA [ Fri Jan 29, 2010 2:22 pm ] |
Post subject: | Re: A2B 144 not answering DID calls |
Joe, Thanks for your reply. I turned everything up and made sure the DIDs are in place correctly but the result is the same. Could it be that one or more tables weren't updated properly? I ask because I can see other table related problems. These same DIDs were working fine in 1.3.4. Thanks again, Robin |
Author: | RobinA [ Fri Feb 05, 2010 3:39 pm ] |
Post subject: | Re: A2B 144 not answering DID calls |
Hello All, I would really appreciate some help here. I turned up A2B's debug to 3 and Asterisk verbosity to 15 and the result is a little different from the first post. (See below) The DIDs are setup correctly because on a new install it works perfectly but on my upgrade is where the problem is and I cannot go back. I compared the table structure of cc_card, and the cc_did* tables with the new install and they seem fine. Everything else is working fine, just the a2billing-did is killing me. Everything works in FreePBX also. Again, I would really appreciate some help here. Here is the output. Code: -- Executing [1XXX8763211@a2billing-did:1] Answer("SIP/DIDx06-0000003d", "") in new stack -- Executing [1XXX8763211@a2billing-did:2] Wait("SIP/DIDx06-0000003d", "1") in new stack -- Executing [1XXX8763211@a2billing-did:3] DeadAGI("SIP/DIDx06-0000003d", "a2billing.php|1|did") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php a2billing.php|1|did: file:a2billing.php - line:102 - uniqueid: - IDCONFIG : 1 ::> 3 a2billing.php|1|did: file:a2billing.php - line:103 - uniqueid: - MODE : did ::> 3 a2billing.php|1|did: file:Class.A2Billing.php - line:710 - uniqueid:1265384206.64 - get_agi_request_parameter = 1992186569 ; SIP/DIDx06-0000003d ; 1265384206.64 ; ; 1XXX8763211 ::> 3 a2billing.php|1|did: file:a2billing.php - line:367 - uniqueid:1265384206.64 - [ANSWER CALL] ::> 3 a2billing.php|1|did: file:a2billing.php - line:382 - uniqueid:1265384206.64 - [DID CALL - [CallerID=1992186569]:[DID=1XXX8763211] ::> 3 a2billing.php|1|did: file:Class.A2Billing.php - line:1229 - uniqueid:1265384206.64 - [A2Billing] DID call friend: FOLLOWME=1 (cardnumber:770XXX9814|destination:SIP/770XXX9814/1XXX8763211/|tariff:3) a2billing.php|1|did: ::> 3 a2billing.php|1|did: file:Class.A2Billing.php - line:1242 - uniqueid:1265384206.64 - [A2Billing] DID call friend: AUTHENTICATION FAILS !!! a2billing.php|1|did: ::> 3 a2billing.php|1|did: file:Class.A2Billing.php - line:1229 - uniqueid:1265384206.64 - [A2Billing] DID call friend: FOLLOWME=2 (cardnumber:770XXX9814|destination:19925127742|tariff:3) a2billing.php|1|did: ::> 3 a2billing.php|1|did: file:Class.A2Billing.php - line:1242 - uniqueid:1265384206.64 - [A2Billing] DID call friend: AUTHENTICATION FAILS !!! a2billing.php|1|did: ::> 3 -- AGI Script a2billing.php completed, returning 0 Thanks, Robin |
Author: | jroper [ Sat Feb 06, 2010 12:16 pm ] |
Post subject: | Re: A2B 144 not answering DID calls |
try setting the destination as:- destination:SIP/770XXX9814 where 770XXX9814 is the a2billing account number Joe |
Author: | RobinA [ Sat Feb 06, 2010 5:43 pm ] |
Post subject: | Re: A2B 144 not answering DID calls [SOLVED] |
Thanks Joe, I tried that but it didn't work. The problem was "sip_iax_friends", if that is set to YES in any of the agi-confX, I encounter major problems. When agi-conf1 was set to yes, the callingcard was using the dnid instead of the destination number entered even though "use_dnid" was set to "no". Now in agi-conf2 I had to use "a2billing-did,2" and "sip_iax_friends" must be set to NO even though this was working fine in 1.3.4. Thanks again. Robin. |
Author: | jroper [ Sat Feb 06, 2010 5:52 pm ] |
Post subject: | Re: A2B 144 not answering DID calls [SOLVED] |
Hi In 1.4 onwards, sip_iax friend is a bit redundant, as we use the DID for customer to customer calling. Also, a couple of releases ago, a change was made to deliver the DNID, which is the number that has been used to access the system in say a call through service, rather than previously the dialled digits. which makes more sense, but has had a couple of unexpected side effects. Joe |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |