asterisk2billing.org
http://forum.asterisk2billing.org/

How to bill for extension call after dialing in from PSTN
http://forum.asterisk2billing.org/viewtopic.php?f=15&t=9181
Page 1 of 1

Author:  brandonchen [ Sat Sep 17, 2011 4:30 pm ]
Post subject:  How to bill for extension call after dialing in from PSTN

I have successfully configured incoming call router, and then call from PSTN is routed to a2billing, and outgoing call can be dialed sucessfully after PIN number is inputted, and Billing for outgoing call through SIP trunk is also sucessful.

However, I also want a2billing to bill for extension call after dialed in from PSTN, which is used to bill for some professional service provided by extension number.
Therefore, could you help to tell me how to configue to bill for customer (Dialling in from PSTN) to dial extension number?

I tested this way but failed: set "PROVIDER IP" to asterisk's IP address in a2billing's trunk UI, and of course added Rate, RateCard, and updated Call Plan, but extension number phone will not ring, though Caller from PSTN heared calling tone :(.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/