No route to destination

mr001 · **Joined:** Fri Nov 16, 2007 12:28 pm **Posts:** 74

Hi,

after I restarted the server i got this error:

Mar 12 23:11:33 NOTICE[2776]: app_dial.c:1049 dial_exec_full: Unable to create channel of type 'SIP' (cause 3 - No route to destination)
centos_2*CLI>

stavros · **Posted:** Thu Mar 13, 2008 2:24 pm

"No route to destination" says it all. Either what you're dialing isn't registered, or you've got network problems.

mr001 · **Joined:** Fri Nov 16, 2007 12:28 pm **Posts:** 74

stavros wrote:

"No route to destination" says it all. Either what you're dialing isn't registered, or you've got network problems.

Yes, but i have routes in a2billing. My LAN network is ok, i can use other providers.

Added after 1 hours 30 minutes:

Sooo, i made a "restart gracefully" and it works. But how can i see the process in Asterisk console? I tipe "asterisk -r" but it shows nothing.

stavros · **Posted:** Mon Mar 17, 2008 2:44 pm

mr001 wrote:

Yes, but i have routes in a2billing.

This isn't an error message from A2Billing, this is from Asterisk itself.

Quote:

Sooo, i made a "restart gracefully" and it works.

So it probably re-registered to your trunk.

Quote:

But how can i see the process in Asterisk console? I tipe "asterisk -r" but it shows nothing.

Asterisk support sites are your best bet for these Asterisk specific questions.

mr001 · **Joined:** Fri Nov 16, 2007 12:28 pm **Posts:** 74

Many thanks for Stavros.

Yes I registered a new trunk, but I made a reboot also.

provided by Star2Billing S.L.

No route to destination

Who is online