Speed Dial Issue

prad · **Posted:** Thu Nov 13, 2008 7:32 am

I have done a system upgrade to

A2B 1.3.4

And asterisk version is 1.4.22

I am facing some issues with the Speed Dial, dialing out. When I dial the speed dial after dialing in the extension or Access Number. After the prompt I enter the speed dial number followed by # doesnt get through (first time).

Then I dial again (second time) the speed dial number followed by # and the call gets through. Everytime I dial speed dial I have to dial it twice or two times to get though.

Any clue why? Attached Asterisk Console logs.

jroper · **Joined:** Fri Jun 23, 2006 3:56 pm **Posts:** 4065

Hi

Sounds like a DTMF issue.

Joe

prad · **Posted:** Thu Nov 13, 2008 9:36 am

Thanks Joe

I am using rfc2833 and these below are my DTMF config in sip.conf

relaxdtmf=yes
dtmfmode=rfc2833
rfc2833compensate=yes

I am wondering if it is a DTMF issue why only for speed dials only. When entering the destination numbers while prompted it passes through and no errors.

stavros · **Posted:** Thu Nov 13, 2008 12:41 pm

It seems you're falling foul of the prompt to enter the SIP friend number, probably because a speed dial is only 2 digits long.
The simplest way I can see to work around this is to set sip_iax_friends=NO in a2billing.conf. Of course this might not be suitable for you.

prad · **Posted:** Fri Nov 14, 2008 6:52 am

Noted. Thanks Starvos.

provided by Star2Billing S.L.

Speed Dial Issue

Who is online