provided by Star2Billing S.L.

I've defined a trunk to use ie.
usrname:[email protected]

after entering card number then asked to enter the destination number
i get the "The number you have is currently unavailable"...etc..etc

please shed some light on this.

thanx

Plz check the following:
Ratecard--->List Tarrifgroup
clich on edit the tarrif group u created

now do the following:
Add a new TARIFFPLAN

Hope this solved the problem( * shall now play to u the maximum duration u can speak for the dialled number)

Hope this helped

Bair

can some1 pls do an example on this.. Ie. i've setup a trunk in A@h called voiphome over SIP with a dialing rule00613+XXXXXXXX as a sample
&
outbound routing
called auline to have a dialplan X.

and so when u dial over xlite it properly dials the trunk


NOW the critical problem.

having the same problem as the original poster.
I have set up a2billing acordingly
with tarrifgroup/ratecard/rates setup

tarrifplan is already added to the tarrif group.
NOW the thing i suspect im going wrong is the data i've entered.
Perhaps some1 can please do an example on each step of the:
1. TRUNK
2. RATECARD
set ups. including some data.

in my TRUNK definition i've put PROVIDERIP to be a trunk from a@h called
voiphome. also tried changing it to reflect. xxx:[email protected]

But still no good.
I get the same message after trying to enter the phone number to be called. I also get thru authentication but after that nope.. i get that message the original poster have entered..

This is giving me a headache being an amatuer at this callingcard setup.

Please help.. and/or perhaps a link somewhere on the web that has a SAMPLE setup guide.

Kind Regards..