provided by Star2Billing S.L.

Hi:
There are 2 cellular company in my country and we need route to one and another by their "prefix", first digits actually:

Movistar first digits : 90,91,92,95,98,99
Claro first digits : 92,93,94,96,97

Our A2billing V1.3 on Asterisk 1.2 (vanilla) is working very well. i have a first GSM-SIP like Movistar trunk(SIP/50), and second GSM-SIP like Claro trunk (SIP/60)

And in my dialplan (before a2billing installed):

[mobil-trunk]
;Movistar trunk
exten => _9[012589]XXXXXX,1,Dial(SIP/50/${EXTEN:0})

;Claro trunk
exten => _9[3467]XXXXXX,1,Dial(SIP/60/${EXTEN:0})

My question is: a2billing takes trunks defined in sip.conf (our case), is posible a2billing takes CONTEXT like trunk [mobil-trunk] instead????

Both have the same buy and sell cost, obviously

Thanks for your replay

Gabo
Lima Peru

Hi

One way of doing this is to set up two rate tables in your call-plan in addition to your A 2 Z termination rate tables.

Call one - Movistar-Rates, and put in 90,91,92,95,98,99 and force it to use the trunk that goes out via the trunk intended for Movistar.

Call the second one Claro, put in 92,93,94,96,97, with your buy and sell rates, and set the trunk to use as your Claro trunk.

The easiest way to set up a trunk in A2Billing is to build and test it in sip.conf, then refer to it by context name in A2Billing trunks.

Joe