provided by Star2Billing S.L.

Hi all,

I'm very new to a2b, and asterisk in general
Currently, im using amp/freepbx with my asterisk, and everything seems to work fine up to that point. I have an FXO gateway connected to the pstn, and i'm able to dial out using one-stage dialing (as below) and receive calls from the pstn.

I just got a2b up and running, and using dnid ive set it to begin the pin/billing script once a user dials 9NXXN. (9 + area code + 7 digit number) because i only want it to bill for pstn calling (at the moment).

The script answers properly upon dialing and requests the PIN number of the user.
However, it always refuses to route the call, saying that the number is unavailable...I'm not quite sure how to properly configure a2b to send the dialed number through to the gateway/trunk after the pin is recognized

anyone able to offer some insight? thanks mucho!

edit for original post...

The error I receive in a2billing.log (debug level 3) is

[09/06/2006 11:49:57]:[CallerID:200]:[CN:2963325463]:[CHANNEL STATUS : -1 = There is no channel that matches SIP/xxx.xxx.xxx-0a1d58a8] (where xxx is my asterisk/a2b box)

If this means anything to anyone =/

I've managed to fix the problem:

It was an error with matching the dialed number to a ratecard!

CAn you please post specific fix ?? I am having exactly same issue .