provided by Star2Billing S.L.

hi everyone,

I have a2billing v1.4 installed and it seem that it is working just fine. My problem has to do with Trunk definition. I want to be able to route calles after PIN validation to another internal extention that has a physical telephone line attached to it. I don't use SIP or IAX. I can make outbound calles from that extension using another internal extention directly ... I just dail 9 and then dail the number i want to call... and it works... asterisk executes successfully

-- Starting simple switch on 'DAHDI/2-1'
-- Executing [97777777777777@Internal:1] Dial("DAHDI/2-1", "dahdi/4/7777777777777") in new stack
-- Called 4/7777777777777
-- DAHDI/4-1 answered DAHDI/2-1
-- Native bridging DAHDI/2-1 and DAHDI/4-1
-- Hungup 'DAHDI/4-1'


However when I dail the same number from the extension that is handled by a2billing I get:


a2billing.php: file:Class.RateEngine.php - line:1204 - uniqueid:1244526221.25 - DIAL dahdi/dahdi/4/7777777777777|60|HRrL(12000000:61000:30000) ::>
.
.
.
WARNING[3318]: file.c:724 ast_readaudio_callback: Failed to write frame
a2billing.php: file:a2billing.php - line:172 - uniqueid:2244526221.25 - [CHANNEL STATUS : = Channel is down and available]

and I get the message "the number you are trying to call is not available".

// Trunk settings
Trunk "IP PROVIDER" is "dahdi/4"
Trunk "ADDITIONAL PARAMETER" is empty


The question is that how do I set up the Trunk "Provider IP" and "Additioal Parameter" correctly?

Thanks for your help.

Set the technology as DAHDI, and the trunk as the Dahdi channel

Joe

Many thanks joe.. I changed the settings as you mentioned and it worked!