asterisk2billing.org http://forum.asterisk2billing.org/ |
|
Numbers not being passed to Endpoint http://forum.asterisk2billing.org/viewtopic.php?f=21&t=7356 |
Page 1 of 1 |
Author: | BVD [ Mon Mar 22, 2010 5:53 pm ] |
Post subject: | Numbers not being passed to Endpoint |
Hi guys, I have one more issue, which I'm not sure is due to the Freepbx part of my setup or the a3billing part (where all my calls route out from). Basically, When users within my voip network ring an external company, the call is fine, but if the call is answered by an auto attendant at the endpoint, which asks the voip user to say input 1 for this, 2 for that etc... the numbers that the voip user enters do not seem to be passed on to the auto attendant at the other end of the line. Is this a known issue or does this seem like something new? Thanks again for any advice that you might have for me. Your help is proving invaluable so far BVD |
Author: | jroper [ Mon Mar 22, 2010 6:08 pm ] |
Post subject: | Re: Numbers not being passed to Endpoint |
You need to confirm, and probably set the DTMF mode all the way through from endpoint to carrier. dtmfmode=rfc2833 Joe |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |