asterisk2billing.org http://forum.asterisk2billing.org/ |
|
Free minutes each call, can be done? http://forum.asterisk2billing.org/viewtopic.php?f=23&t=7247 |
Page 1 of 1 |
Author: | ciconet [ Sun Mar 07, 2010 4:46 pm ] |
Post subject: | Free minutes each call, can be done? |
I've a simply question: need to give to each call first seven free minutes ( first seven not billed minutes ). example: sell rate of usa is 0.03 -> 60sec - 60sec and connect charge of 0.20. I want each call is billed in this way: ( 4 samples ) 1) Call destination usa with 3 min duration: customer pay only connect charge 0.20 ( include 7 min ) and no other: Total customer charge 0.20. 2) Call destination usa with 6 min duration: customer pay only connect charge 0.20 ( include 7 min ) and no other: Total customer charge 0.20. 3) Call destination usa with 8 min duration: customer pay connect charge 0.20 ( include 7 min ) + 1 min ( specified in selling rate 0.03 -> 60 - 60 ): Total customer charge 0.23. 4) Call destination usa with 10 min duration: customer pay connect charge 0.20 ( include 7 min ) + 3 min ( specified in selling rate 0.03 -> 60 - 60 ): Total customer charge 0.29. How can i do this if possible ? In package ( freesecond ) i don't find nothing for do this. Can i use the ROUNDING CALL TIME ? How can i use it ? Thanks in advance Alex |
Author: | jroper [ Mon Mar 08, 2010 8:21 am ] |
Post subject: | Re: Free minutes each call, can be done? |
Used the advance ratecard, which allows stepped billing, this should get you closer to your requirements. There is a setting in the system settings to turn it on. Joe |
Author: | ciconet [ Mon Mar 08, 2010 11:00 am ] |
Post subject: | Re: Free minutes each call, can be done? |
Hello Jroper thanks again for you help. I see advanced menu in ratecard. So about my scenario i put this: buyrate=0.015 buyrate min duration = 1 buyrate billing block = 1 << when call is answer - initial >> Selling rate=0.03 ( i don't want to aply now this charge ) sellrate min duration=0 sellrate billing block=0 connect charge=0.20 ( i want to apply only this charge to customer for 7 minutes ) disconnect charge=0 << after call answer -> go here ?? >> Stepcharge A= 0 charge A=0 Timecharge A= 420 ( this is 7 minutes in seconds ?? ) Billing block A=0 << after call is billed from A condition -> go here ?? >> Stepcharge B= 0 Charge B=0.03 Timecharge B= 99999 ( this is duration limit of call ??? ) Billing block B=60 ( each 60 seconds charge 0.03 to customer, right ? ) This config not work, and i try to move other but don't understand how SellingRATE -> Step A -> Step B order works. Please light me !! Alex |
Author: | ciconet [ Tue Mar 09, 2010 8:48 am ] |
Post subject: | Re: Free minutes each call, can be done? |
i make other tests but not work... or i don't understand how it work. 1° selling rate 2° Step A 3° Step B or 1° Step A 2° Step B 3° Selling Rate Connect charge work only if i put it on Selling Rate. In other, A or B ( Stepcharge ) never work... |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |