Good day,
I have installed the A2billing with Asterisk, the systems is working but I have encountered the following problem:
I have created a customer card ( account), the customer card of prepaid type and gives the possibilty of simultaneous access. I connected 3 SIP clients to this account progressively, the credit in this account is sufficient for 1 minute. For my test , I have done the traffis such that 1$ equivalent to 1 minute.
I start the test by making call with the first client, the system tells me I have 1 minute then after the 10 seconds I make the second call with the second client, the system still tell me I have 1 minute. After 20 seconds, I do the same with the other client, the system still tell me I have 1 minute. I allow the three calls to consume all the provided time for each. When all the calls have elasped, I verify the credit left in the customer card is -2$.
From the result I obtained from this test, I suppose that the system should tell a client on a simultaneous access account the time available which takes in considerations the time already consumed by the clients using the account at that moment. Secondly the system should be able to stop all calls if the the credit left in the card is zero.
I will be very greatful to have the solution to the above problem.
Best regards,
Njei Check
|