Noob requires help.

bainwave · **Joined:** Wed Apr 10, 2013 4:13 am **Posts:** 6

Hi experts,
As the subject says am new to this A2billing.
Need your help in configuring, for inbound calls through a PRI (30 channels)
My requirement is as follows...

1. User calls from his mobile/Landline.
2. The box should check for the balance available for his number and if the balance is available, it should sent to the extension.
3. If no balance is available the call should hangup.

Speedy help is highly appreciated.

bainwave · **Joined:** Wed Apr 10, 2013 4:13 am **Posts:** 6

Team,
Bump

DigitalDaz · **Joined:** Thu Nov 03, 2011 11:12 pm **Posts:** 18

You are surely a joker or a complete knob

bainwave · **Joined:** Wed Apr 10, 2013 4:13 am **Posts:** 6

Hi,
Thanks for your comments. But am totally new to this A2billing. Read some docs on Google.
Appreciate if you can really help.

davewood · **Joined:** Sun Apr 21, 2013 2:52 am **Posts:** 7

You need to first configure your PRI Card in the Asterisk. Then you need to setup Trunk in the A2billing.
Set tech in the A2Billing Trunk as dahdi, and put in the channel.

A2Billing is made for all the features you are looking for.
1. User calls from his mobile/Landline.
2. The box should check for the balance available for his number and if the balance is available, it should sent to the extension.
3. If no balance is available the call should hangup.

bainwave · **Joined:** Wed Apr 10, 2013 4:13 am **Posts:** 6

Hi Davewood,
Thanks for your reply.
As am a noob, may be a step by step procedure requested.
Looking for your help.

Bain

bainwave · **Joined:** Wed Apr 10, 2013 4:13 am **Posts:** 6

Experts,
Bump

provided by Star2Billing S.L.

Noob requires help.

Who is online