Support A2Billing :

provided by Star2Billing S.L.

Support A2Billing :
It is currently Sun Aug 25, 2019 6:49 am
Predictive Dialer


All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Setup calling card/access number
PostPosted: Fri Aug 07, 2015 11:16 am 
Offline

Joined: Thu May 07, 2015 8:36 am
Posts: 7
Hi,

Apologies if this has been asked before but I am still new to Asterisk and A2billing, I'm struggling to figure out how to setup the calling card/access number.

I have the a2billing contexts in my extensions.conf and am thinking there needs to be an did pointing to this but not really sure?

I'm using Ubuntu 14.04, asterisk 13.3.2 and a2billing 2.1.1, most of the guides I've seen use FreePBX which I don't have installed.


Top
 Profile  
 
 Post subject: Re: Setup calling card/access number
PostPosted: Sat Aug 08, 2015 8:56 am 
Offline

Joined: Mon Mar 02, 2009 8:56 pm
Posts: 271
Yes, exactly, you need a little dial plan to pass the call to a2billing. There an example here for DID numbers, but an access number would be similar (except you'd be passing the call to a2billing, not a2billing-did)

https://sysadminman.net/blog/2011/a2b10 ... lling-3233

Matt


Top
 Profile  
 
 Post subject: Re: Setup calling card/access number
PostPosted: Mon Aug 10, 2015 9:23 am 
Offline

Joined: Thu May 07, 2015 8:36 am
Posts: 7
Hi Matt,

I'm taking things a step at time which is why I'm still using internal extensions for testing before moving on and have my dialpan setup as below.

[LocalSets]

exten =>007,1,Goto(a2billing,${EXTEN},1)
exten =>007,n,HangUp()

[a2billing]
include => a2billing_callingcard
include => a2billing_monitoring
include => a2billing_voucher

[a2billing_callingcard]
; CallingCard application
exten => _X.,1,NoOp(A2Billing Start)
exten => _X.,n,DeadAgi(a2billing.php,1)
exten => _X.,n,Hangup

[a2billing_voucher]
exten => _X.,1,Answer(1)
exten => _X.,n,DeadAgi(a2billing.php,1,voucher)
;exten => _X.,n,AGI(a2billing.php,1,voucher44) ; will add 44 in front of the ca$
exten => _X.,n,Hangup

[a2billing_did]
exten => _X.,1,DeadAgi(a2billing.php,1,did)
exten => _X.,2,Hangup

If I dial 007 for what should be my access number I get this:

*CLI> == Using SIP RTP CoS mark 5
-- Executing [[email protected]:1] Goto("SIP/004-00000000", "a2billing,007,1") in new stack
-- Goto (a2billing,007,1)
-- Executing [[email protected]:1] NoOp("SIP/004-00000000", "A2Billing Start") in new stack
-- Executing [[email protected]:2] DeadAGI("SIP/004-00000000", "a2billing.php,1") in new stack
-- Executing [[email protected]:3] Hangup("SIP/004-00000000", "") in new stack
== Spawn extension (a2billing, 007, 3) exited non-zero on 'SIP/004-00000000'

and the call shows as failed on my softphone?


Top
 Profile  
 
 Post subject: Re: Setup calling card/access number
PostPosted: Mon Aug 10, 2015 9:32 am 
Offline

Joined: Mon Mar 02, 2009 8:56 pm
Posts: 271
For a calling card access number I think you need to be answering the call in the dial plan. Can't remember if A2Billing does that or not (there's a setting for it in the agi_conf).

Either way it looks like the call is being passed to a2billing, so I'd switch on the debug and see what a2billing is doing with the call - https://sysadminman.net/blog/2011/a2bil ... gging-2417

Matt


Top
 Profile  
 
 Post subject: Re: Setup calling card/access number
PostPosted: Wed Aug 12, 2015 1:28 pm 
Offline

Joined: Thu May 07, 2015 8:36 am
Posts: 7
I had a look at the settings for agi-conf1 in the portal and there is a key for answer_call which is set to yes.

I've also turned on debugging but it doesn't produce any output agi_log? permissions appear to be correct as well so don't know why it isn't generating anything.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 
Auto Dialer Software


All times are UTC


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group