| asterisk2billing.org http://forum.asterisk2billing.org/ |
|
| Extra ring tone / delay when answering phone http://forum.asterisk2billing.org/viewtopic.php?f=33&t=7551 |
Page 1 of 1 |
| Author: | jades [ Sat Apr 24, 2010 9:14 pm ] |
| Post subject: | Extra ring tone / delay when answering phone |
Hello, I separated my freepbx and a2billing servers, mainly so that the performance could be much better. I was not having this problem when a2billing and freepbx were on the same box. But as of now, when I call into one of my DIDs and pick up the phone on the other side, the calling party still hears ringing for another second or so, therefore by the time I pick up and say "hello", the person only hears the "o" part. Is there a way to fix this? This is what I have for the a2billing-did inbound routes: exten => 12125551212,1,NoOp exten => 12125551212,n,Goto(a2billing-did,${EXTEN},1) exten => 12125551212,n,Hangup And in DID destination, if it is ringing an extension on the freepbx end, the destination would read: sip/12125551212@IP_address_of_freepbx Your help is appreciated PS- on my system, agi conf1 is not used for calling cards, so answer_call is set to 'no' (and I hope I dont need to change this to 'yes' to have this working) |
|
| Author: | jroper [ Tue Apr 27, 2010 2:36 pm ] |
| Post subject: | Re: Extra ring tone / delay when answering phone |
Hi Answer the call in the dial plan, then put a wait command in after answering the call for a second or two, then pass the call into A2Billing. Joe |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|