Ok I went ahead and installed A2 on a trixbox manchine (i found a great script that does the instalation for you)
the installation went whithoud a hitch for a change.
So now i had a clean install of trixbox with A2. After fixing a few initial configuration problems i was able to create a customer and have it connect to the server. now in order to test asterisk i created an extention in freepbx and setup the trunk in free pbx as well and using the extention created in freepbx im able do dail out succesfully.
so now i know the trunk is working correctly.
however i ran into a porblem I though I previusly tackeld,
it seems A2 is unable to find a rate for the destination.
When i try and simulate the call I get a message "No matching rate found !" on the phone when I dail I get a message that the number I have dailed is currently unavailable.
In oder to fix this I attempted matching the settings from my other A2 testing machine with this new one so I set it up the same as the previus machine. now on the first machine these settings produce results in the simulation and it attempts to dail out but in the new machine it fails to find a rate and thus cancels the call.
is there any way i can check why its now not finding a rate? logs i could look into or crusial settings i mist?
I added rate and trunk settings here
mind you the trunk is working when i connect using an extention created in freepbx (running on the same asterisk server of cause)
Code:
=====call plan=======
NAME test call plan
LC TYPE LCR
PACKAGE no package offer
REMOVE INTER PREFIX Yes
RATECARD test rate
======rate card======
TARIFFNAME test rate
START DATE 2010-05-26 23:09:44
EXPIRY DATE 2035-05-26 23:09:44
TRUNK test
DESCRIPTION test rates
DNID PREFIX all
CALLERID PREFIX all
=======Rate=========
RATECARD test rate
DIALPREFIX 31
Destination Prefix 31
BUYING RATE 0.01000
BUYRATE MIN DURATION 10
BUYRATE BILLING BLOCK 10
SELLING RATE 0.02000
SELLRATE MIN DURATION 30
SELLRATE BILLING BLOCK 30
CONNECT CHARGE 0.05000
DISCONNECT CHARGE 0.00000
DISCONNECT CHARGE THRESHOLD 120
MINIMUM CALL COST 0.08000
START DATE 2010-05-26 23:10:19
STOP DATE 2020-05-26 23:10:19
START TIME 0
END TIME 10079
ROUNDING CALLTIME 10
ROUNDING THRESHOLD 5
ADDITIONAL BLOCK CHARGE 0.00000
ADDITIONAL BLOCK CHARGE TIME 0
ADDITIONAL GRACE TIME 5
TRUNK test
CIDGroup not defined
TAG test
========trunk configuration==========
VOIP-PROVIDER 12connect
LABEL test
ADD PREFIX 00
REMOVE PREFIX
PROVIDER TECH SIP
PROVIDER IP test
ADDITIONAL PARAMETER
FAILOVER TRUNK notdefined
CURRENT CONNECTIONS 0
MAXIMUM CONNECTIONS 2
IFMAXUSED use failover trunk
STATUS active
needles to say this is frustrating being close but not quite there yet