Dear Asterisk Gurus
Im trying to display the accountnumber,credit and callrate in the command "core show channel" command as its not displayed currently in the output:
a2billingserver1*CLI> core show channel SIP/SIP-out-00000144
-- General --
Name: SIP/SIP-out-00000144
Type: SIP
UniqueID: 1394726671.324
LinkedID: 1394726671.324
Caller ID: 99573573
Caller ID Name: (N/A)
Connected Line ID: (N/A)
Connected Line ID Name: (N/A)
Eff. Connected Line ID: (N/A)
Eff. Connected Line ID Name: (N/A)
DNID Digits: 24000010
Language: en
State: Up (6)
Rings: 0
NativeFormats: (ulaw)
WriteFormat: ulaw
ReadFormat: ulaw
WriteTranscode: No
ReadTranscode: No
1st File Descriptor: 28
Frames in: 1474
Frames out: 1708
Time to Hangup: 0
Elapsed Time: 0h0m39s
Direct Bridge: SIP/SIP-out-00000145
Indirect Bridge: SIP/SIP-out-00000145
-- PBX --
Context: custom-a2billing
Extension: 24000010
Priority: 1
Call Group: 0
Pickup Group: 0
Application: Dial
Data: SIP/SIP-out/24000010,60,HRrL(900000:61000:00000)
Blocking in: ast_waitfor_nandfds
Call Identifer: [C-000000aa]
Variables:
[email protected]:5060
BRIDGEPEER=SIP/SIP-out-00000145
DIALEDPEERNUMBER=SIP-out/24000010
DIALEDPEERNAME=SIP/SIP-out-00000145
DIALSTATUS=ANSWER
DIALEDTIME=
ANSWEREDTIME=
CALLINGPRES_SV=allowed_not_screened
MOHCLASS=default
GOSUB_RETVAL=
CALLED_BLACKLIST=1
FROM_DID=24000010
[email protected]SIPDOMAIN=10.10.10.7
SIPURI=sip:
[email protected]:5060
CDR Variables:
level 1: dnid=24000010
level 1: did=24000010
level 1: clid=99573573
level 1: src=99573573
level 1: dst=24000010
level 1: dcontext=custom-a2billing
level 1: channel=SIP/SIP-out-00000144
level 1: dstchannel=SIP/SIP-out-00000145
level 1: lastapp=Dial
level 1: lastdata=SIP/SIP-out/24000010,60,HRrL(900000:61000:00000)
level 1: start=2014-03-13 18:04:31
level 1: answer=2014-03-13 18:04:41
level 1: duration=39
level 1: billsec=29
level 1: disposition=ANSWERED
level 1: amaflags=DOCUMENTATION
level 1: uniqueid=1394726671.324
level 1: linkedid=1394726671.324
level 1: sequence=480
Im guessing this should be shown in the CDR variables, does anyone have an idea how to add this information?
Your assistance is greatly appreciated thanks!