asterisk2billing.org http://forum.asterisk2billing.org/ |
|
a2billing sending call to provider as "number"|60|HRrl(85710 http://forum.asterisk2billing.org/viewtopic.php?f=35&t=11894 |
Page 1 of 1 |
Author: | abhi51193 [ Sun Nov 15, 2015 9:40 am ] |
Post subject: | a2billing sending call to provider as "number"|60|HRrl(85710 |
I Am new in a2billing. I have installed elastix 2.4 and a2billing 1.9.4 after installing i created trunk for outbound and inbound, then i aded outbound and inbound routes. I also added custom destination suggested here https://sysadminman.net/blog/2009/integ ... illing-621 then i forward my inbound routes to the above custom destination In A2biiling I added customer,callplan,ratecard,rates,trunks etc. I check in simulator and that works fine. Now problem is when i start calling It ask for pin number. I then provide my account number then issue are 1) It doesn't says my balance 2) after giving number to dial , It doesnt says my remaining minutes 3) After that It hangup automatically and in my provider's cdr i get "number"|60|HRrl(8571000 under "called number" Below is the cli generated when i make call == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Executing [12069009315@from-trunk-sip-localphone:1] Set("SIP/localphone-00000022", "GROUP()=OUT_3") in new stack -- Executing [12069009315@from-trunk-sip-localphone:2] Goto("SIP/localphone-00000022", "from-trunk,12069009315,1") in new stack -- Goto (from-trunk,12069009315,1) -- Executing [12069009315@from-trunk:1] Set("SIP/localphone-00000022", "__FROM_DID=12069009315") in new stack -- Executing [12069009315@from-trunk:2] Gosub("SIP/localphone-00000022", "app-blacklist-check,s,1") in new stack -- Executing [s@app-blacklist-check:1] GotoIf("SIP/localphone-00000022", "0?blacklisted") in new stack -- Executing [s@app-blacklist-check:2] Set("SIP/localphone-00000022", "CALLED_BLACKLIST=1") in new stack -- Executing [s@app-blacklist-check:3] Return("SIP/localphone-00000022", "") in new stack -- Executing [12069009315@from-trunk:3] ExecIf("SIP/localphone-00000022", "1 ?Set(CALLERID(name)=Restricted)") in new stack -- Executing [12069009315@from-trunk:4] Set("SIP/localphone-00000022", "__CALLINGPRES_SV=allowed_not_screened") in new stack -- Executing [12069009315@from-trunk:5] Set("SIP/localphone-00000022", "CALLERPRES()=allowed_not_screened") in new stack -- Executing [12069009315@from-trunk:6] Goto("SIP/localphone-00000022", "a2billing,12069009315,1") in new stack -- Goto (a2billing,12069009315,1) -- Executing [12069009315@a2billing:1] Answer("SIP/localphone-00000022", "") in new stack -- Executing [12069009315@a2billing:2] Wait("SIP/localphone-00000022", "1") in new stack -- Executing [12069009315@a2billing:3] DeadAGI("SIP/localphone-00000022", "a2billing.php,1") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php -- <SIP/localphone-00000022> Playing 'prepaid-enter-pin-number.gsm' (language 'en') failed to extend from 256 to 424 failed to extend from 256 to 424 -- AGI Script Executing Application: (DIAL) Options: (SIP/iqtelecom/12069009315|60|HRrL(85710000:61000:30000)) == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Called SIP/iqtelecom/12069009315|60|HRrL(85710000:61000:30000) -- SIP/iqtelecom-00000023 is making progress passing it to SIP/localphone-00000022 == Everyone is busy/congested at this time (1:0/0/1) -- <SIP/localphone-00000022> Playing 'prepaid-enter-dest.gsm' (language 'en') failed to extend from 256 to 424 -- AGI Script Executing Application: (DIAL) Options: (SIP/iqtelecom/127281581939|60|HRrL(85710000:61000:30000)) == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Called SIP/iqtelecom/127281581939|60|HRrL(85710000:61000:30000) -- SIP/iqtelecom-00000024 is making progress passing it to SIP/localphone-00000022 == Everyone is busy/congested at this time (1:0/0/1) -- <SIP/localphone-00000022> Playing 'prepaid-enter-dest.gsm' (language 'en') failed to extend from 256 to 424 -- <SIP/localphone-00000022>AGI Script a2billing.php completed, returning 4 == Spawn extension (a2billing, 12069009315, 3) exited non-zero on 'SIP/localphone-00000022' failed to extend from 256 to 424 failed to extend from 256 to 424 |
Author: | jroper [ Mon Nov 16, 2015 9:15 am ] |
Post subject: | Re: a2billing sending call to provider as "number"|60|HRrl(85710 |
Hi For security reasons, you need to upgrade immediately to version 2.2 You need to set your Asterisk version from 1_4 to 1_11 Joe |
Author: | abhi51193 [ Mon Nov 16, 2015 12:05 pm ] |
Post subject: | Re: a2billing sending call to provider as "number"|60|HRrl(85710 |
How to update to version 2.2 ? Do you have any guide regarding that? After updating asterisk version from 1_4 to 1_11 I am still facing the same issue. No changes |
Author: | jroper [ Mon Nov 16, 2015 12:56 pm ] |
Post subject: | Re: a2billing sending call to provider as "number"|60|HRrl(85710 |
Hi Are you still getting: 3) After that It hangup automatically and in my provider's cdr i get "number"|60|HRrl(8571000 under "called number" Are you still getting: -- AGI Script Executing Application: (DIAL) Options: (SIP/iqtelecom/12069009315|60|HRrL(85710000:61000:30000)) instead of -- AGI Script Executing Application: (DIAL) Options: (SIP/iqtelecom/12069009315,60,HRrL(85710000:61000:30000)) Maybe you have not changed the Asterisk version in Global and the AGI-Conf? Joe |
Author: | abhi51193 [ Mon Nov 16, 2015 3:33 pm ] |
Post subject: | Re: a2billing sending call to provider as "number"|60|HRrl(85710 |
Hi, Thank you for your prompt response after changing asterisk version and in agi.conf1 file in the system setting i replace "|" with "," one of my problem is resolved. But when i register sip using "voip settings" in my a2biiling admin pannel it shows "error 403" -- Unregistered SIP '1000' [2015-11-16 10:32:26] NOTICE[2820]: chan_sip.c:25579 handle_request_register: Registration from '"6372795222"<sip:[email protected]:5060>' failed for '115.187.63.110:37286' - No matching peer found [2015-11-16 10:32:27] NOTICE[2820]: chan_sip.c:25579 handle_request_register: Registration from '"6372795222"<sip:[email protected]:5060>' failed for '115.187.63.110:37286' - No matching peer found Please help |
Author: | jroper [ Mon Nov 16, 2015 4:05 pm ] |
Post subject: | Re: a2billing sending call to provider as "number"|60|HRrl(85710 |
Hi That's what setting the Asterisk version does! It changes pipes to commas. Joe |
Author: | abhi51193 [ Mon Nov 16, 2015 6:53 pm ] |
Post subject: | Re: a2billing sending call to provider as "number"|60|HRrl(85710 |
when i register sip using "voip settings" in my a2biiling admin pannel it shows "error 403" -- Unregistered SIP '1000' [2015-11-16 10:32:26] NOTICE[2820]: chan_sip.c:25579 handle_request_register: Registration from '"6372795222"<sip:[email protected]:5060>' failed for '115.187.63.110:37286' - No matching peer found [2015-11-16 10:32:27] NOTICE[2820]: chan_sip.c:25579 handle_request_register: Registration from '"6372795222"<sip:[email protected]:5060>' failed for '115.187.63.110:37286' - No matching peer found Please help |
Author: | jroper [ Tue Nov 17, 2015 9:43 am ] |
Post subject: | Re: a2billing sending call to provider as "number"|60|HRrl(85710 |
Hi You may not have set up Asterisk Realtime correctly... core set verbose 7 core set debug 7 ...will give you more information. Joe |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |