asterisk2billing.org
http://forum.asterisk2billing.org/

a2billing sending call to provider as "number"|60|HRrl(85710
http://forum.asterisk2billing.org/viewtopic.php?f=35&t=11894
Page 1 of 1

Author:  abhi51193 [ Sun Nov 15, 2015 9:40 am ]
Post subject:  a2billing sending call to provider as "number"|60|HRrl(85710

I Am new in a2billing.

I have installed elastix 2.4 and a2billing 1.9.4

after installing i created trunk for outbound and inbound, then i aded outbound and inbound routes. I also added custom destination suggested here https://sysadminman.net/blog/2009/integ ... illing-621

then i forward my inbound routes to the above custom destination

In A2biiling I added customer,callplan,ratecard,rates,trunks etc. I check in simulator and that works fine.

Now problem is when i start calling

It ask for pin number. I then provide my account number then issue are

1) It doesn't says my balance
2) after giving number to dial , It doesnt says my remaining minutes
3) After that It hangup automatically and in my provider's cdr i get "number"|60|HRrl(8571000 under "called number"


Below is the cli generated when i make call


== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [[email protected]:1] Set("SIP/localphone-00000022", "GROUP()=OUT_3") in new stack
-- Executing [[email protected]:2] Goto("SIP/localphone-00000022", "from-trunk,12069009315,1") in new stack
-- Goto (from-trunk,12069009315,1)
-- Executing [[email protected]:1] Set("SIP/localphone-00000022", "__FROM_DID=12069009315") in new stack
-- Executing [[email protected]:2] Gosub("SIP/localphone-00000022", "app-blacklist-check,s,1") in new stack
-- Executing [[email protected]:1] GotoIf("SIP/localphone-00000022", "0?blacklisted") in new stack
-- Executing [[email protected]:2] Set("SIP/localphone-00000022", "CALLED_BLACKLIST=1") in new stack
-- Executing [[email protected]:3] Return("SIP/localphone-00000022", "") in new stack
-- Executing [[email protected]:3] ExecIf("SIP/localphone-00000022", "1 ?Set(CALLERID(name)=Restricted)") in new stack
-- Executing [[email protected]:4] Set("SIP/localphone-00000022", "__CALLINGPRES_SV=allowed_not_screened") in new stack
-- Executing [[email protected]:5] Set("SIP/localphone-00000022", "CALLERPRES()=allowed_not_screened") in new stack
-- Executing [[email protected]:6] Goto("SIP/localphone-00000022", "a2billing,12069009315,1") in new stack
-- Goto (a2billing,12069009315,1)
-- Executing [[email protected]:1] Answer("SIP/localphone-00000022", "") in new stack
-- Executing [[email protected]:2] Wait("SIP/localphone-00000022", "1") in new stack
-- Executing [[email protected]:3] DeadAGI("SIP/localphone-00000022", "a2billing.php,1") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php
-- <SIP/localphone-00000022> Playing 'prepaid-enter-pin-number.gsm' (language 'en')
failed to extend from 256 to 424
failed to extend from 256 to 424
-- AGI Script Executing Application: (DIAL) Options: (SIP/iqtelecom/12069009315|60|HRrL(85710000:61000:30000))
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called SIP/iqtelecom/12069009315|60|HRrL(85710000:61000:30000)
-- SIP/iqtelecom-00000023 is making progress passing it to SIP/localphone-00000022
== Everyone is busy/congested at this time (1:0/0/1)
-- <SIP/localphone-00000022> Playing 'prepaid-enter-dest.gsm' (language 'en')
failed to extend from 256 to 424
-- AGI Script Executing Application: (DIAL) Options: (SIP/iqtelecom/127281581939|60|HRrL(85710000:61000:30000))
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called SIP/iqtelecom/127281581939|60|HRrL(85710000:61000:30000)
-- SIP/iqtelecom-00000024 is making progress passing it to SIP/localphone-00000022
== Everyone is busy/congested at this time (1:0/0/1)
-- <SIP/localphone-00000022> Playing 'prepaid-enter-dest.gsm' (language 'en')
failed to extend from 256 to 424
-- <SIP/localphone-00000022>AGI Script a2billing.php completed, returning 4
== Spawn extension (a2billing, 12069009315, 3) exited non-zero on 'SIP/localphone-00000022'
failed to extend from 256 to 424
failed to extend from 256 to 424

Author:  jroper [ Mon Nov 16, 2015 9:15 am ]
Post subject:  Re: a2billing sending call to provider as "number"|60|HRrl(85710

Hi

For security reasons, you need to upgrade immediately to version 2.2

You need to set your Asterisk version from 1_4 to 1_11

Joe

Author:  abhi51193 [ Mon Nov 16, 2015 12:05 pm ]
Post subject:  Re: a2billing sending call to provider as "number"|60|HRrl(85710

How to update to version 2.2 ? Do you have any guide regarding that?

After updating asterisk version from 1_4 to 1_11 I am still facing the same issue. No changes

Author:  jroper [ Mon Nov 16, 2015 12:56 pm ]
Post subject:  Re: a2billing sending call to provider as "number"|60|HRrl(85710

Hi

Are you still getting:
3) After that It hangup automatically and in my provider's cdr i get "number"|60|HRrl(8571000 under "called number"

Are you still getting:
-- AGI Script Executing Application: (DIAL) Options: (SIP/iqtelecom/12069009315|60|HRrL(85710000:61000:30000))
instead of
-- AGI Script Executing Application: (DIAL) Options: (SIP/iqtelecom/12069009315,60,HRrL(85710000:61000:30000))

Maybe you have not changed the Asterisk version in Global and the AGI-Conf?

Joe

Author:  abhi51193 [ Mon Nov 16, 2015 3:33 pm ]
Post subject:  Re: a2billing sending call to provider as "number"|60|HRrl(85710

Hi,

Thank you for your prompt response

after changing asterisk version and in agi.conf1 file in the system setting i replace "|" with "," one of my problem is resolved.

But

when i register sip using "voip settings" in my a2biiling admin pannel it shows "error 403"

-- Unregistered SIP '1000'
[2015-11-16 10:32:26] NOTICE[2820]: chan_sip.c:25579 handle_request_register: Registration from '"6372795222"<sip:[email protected]:5060>' failed for '115.187.63.110:37286' - No matching peer found
[2015-11-16 10:32:27] NOTICE[2820]: chan_sip.c:25579 handle_request_register: Registration from '"6372795222"<sip:[email protected]:5060>' failed for '115.187.63.110:37286' - No matching peer found


Please help

Author:  jroper [ Mon Nov 16, 2015 4:05 pm ]
Post subject:  Re: a2billing sending call to provider as "number"|60|HRrl(85710

Hi

That's what setting the Asterisk version does! It changes pipes to commas.

Joe

Author:  abhi51193 [ Mon Nov 16, 2015 6:53 pm ]
Post subject:  Re: a2billing sending call to provider as "number"|60|HRrl(85710

when i register sip using "voip settings" in my a2biiling admin pannel it shows "error 403"

-- Unregistered SIP '1000'
[2015-11-16 10:32:26] NOTICE[2820]: chan_sip.c:25579 handle_request_register: Registration from '"6372795222"<sip:[email protected]:5060>' failed for '115.187.63.110:37286' - No matching peer found
[2015-11-16 10:32:27] NOTICE[2820]: chan_sip.c:25579 handle_request_register: Registration from '"6372795222"<sip:[email protected]:5060>' failed for '115.187.63.110:37286' - No matching peer found


Please help

Author:  jroper [ Tue Nov 17, 2015 9:43 am ]
Post subject:  Re: a2billing sending call to provider as "number"|60|HRrl(85710

Hi

You may not have set up Asterisk Realtime correctly...

core set verbose 7
core set debug 7

...will give you more information.

Joe

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/