Support A2Billing :

provided by Star2Billing S.L.

Support A2Billing :
It is currently Thu Apr 25, 2024 1:55 pm
Predictive Dialer


All times are UTC




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: In call back cid check by G.S.M gateway
PostPosted: Sun Dec 14, 2008 5:30 am 
Offline

Joined: Sun Dec 14, 2008 5:23 am
Posts: 3
helloo all i am new to asterisk. the thing is my wole server is working billing call back and sip and iax. i have 1 trunk xyz in trixbox configures that a sip trunk. and every thing is fine with that. now the thing is that i want to use a gsm gateway with that so that somebody call my mobile number and gsmgateway forward that to trixbox and after that a2billing capture cid and authorize that and disconnect the call and after that a2billing make call back using that xyz trunk and give the dialtone and ask to enter destination number so the thing is how can i configure all that. please reply me. and i want to use that gsm gateways at the place of fxo fxp diginum cards so please dono reply me to go after that cards thanx for ur help


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 14, 2008 6:50 am 
Offline

Joined: Fri Jun 23, 2006 3:56 pm
Posts: 4065
1. set up trunk to GSM gateway.
2. Bring incoming calls from GSM gateway into a context that launches - deadAGI(a2billing.php|1|cid-callback|34) ;last parameter is the callback area code
3. Make sure you have a context as below as well as point 2:-
Code:
[a2billing-callback]
exten => _X.,1,deadAGI(a2billing.php|1|callback)
exten => _X.,n,Hangup

4. make sure callback Daemon is running. instructions in the addon/docs folder in the tarball.
5. Make sure CID exactly as delivered is listed against your customer.

Joe


Top
 Profile  
 
 Post subject: thanx for
PostPosted: Sun Dec 14, 2008 4:19 pm 
Offline

Joined: Sun Dec 14, 2008 5:23 am
Posts: 3
thNX FOR QUICK REPLY AND 1 MORE THING if i do all that then i dono have to make any ring group or exxtenssion in asterisk trixbox right i just have to make a trunk and inbound route. and other work gonna be in a2billing right. and one thing is there any way that i can install any kind of reseller module or 2checkout module with a2billing i dono have authorize.net my alll other work is on 2checkout. please let me know hanx very much................................................. and yeh i got a a2billing-callback context to make web call back so i have to put 1 more this in there for cid call back or is that alll


Top
 Profile  
 
 Post subject: Re: thanx for
PostPosted: Sun Dec 14, 2008 5:23 pm 
Offline
Moderator
User avatar

Joined: Thu Jun 22, 2006 2:19 pm
Posts: 2890
Location: Devon, UK
samvirk wrote:
2checkout module
I was asked to implement a 2co payment module for A2B this time last year. Their terms and conditions make explicit reference to VoIP and prepaid calling-cards, which raised my suspicions.
I never received a response from them when I asked for clarification, despite sending the email 3 times at monthly intervals:
stavros via email wrote:
Hi there.
I'm one of the developers of http://www.asterisk2billing.org/ , which is an
open-source VoIP billing application. A2B already supports three other
payment gateways (Paypal, Moneybookers and Authorize.net), and recently a
bounty has been offered for implementing support for 2co.com too.

Whilst searching for your API documentation I took the time to read
https://www2.2checkout.com/documentatio ... bited.html

Would you please so kind as to furnish me with your alternate rates and terms
& conditions for "Telephone Service, Long Distance, VoIP or PC-to-Phone
Service" as A2B evidently falls into this category.

Sadly, I'm not convinced you'd be happy to process payments originating from
A2B installations at all, but let me describe our software, so you can
form your own opinion.

A2B was designed as a platform for pre-paid and/or post-paid PC-to-phone
service. In addition to the softphone provided in the A2B web interface, it
can also be used with any SIP, H.323 (and many other technologies) endpoint.

A2B can optionally provide an IVR which prompts for an identification number,
a phone number and then connects the call. This feature debits from the same
balance as the user's VoIP account described above, which may be invoiced
later or pre-paid. The IVR itself can be accessed via a VoIP call or a PSTN
call. This seems as though it might be at odds with your prohibited
product "prepaid phone cards".

I'd appreciate any clarification you can offer on your stance regarding our
product. I'm loath to invest the time necessary to support your payment
gateway if your policy dictates you must rescind access to our users.

Thanks for your time.
With no response from them I found other more promising avenues to keep me busy.


Top
 Profile  
 
 Post subject: hello
PostPosted: Mon Dec 15, 2008 3:53 am 
Offline

Joined: Sun Dec 14, 2008 5:23 am
Posts: 3
hello buddy i have spoken to 2co about this situagtion as i am there very old and high ale custmer. and they told me this thing that 2co gateway is also bonded with fraud protection system so when the customer pays any amount it goes first to fraud protection system so it takes 2 hours to 24 hours full to gat that money actualy in ur account and if u are selling any minutes or any electronic ting ewith that gateway thats not very good idea as if the payment is fraud then u not gonna get the money in ur account but on the time of u gived balance to customer who used that card and he/she can use all his minutes within that 2hours and u dono know that payent gonna be clear or not so. its not a very good aidea to use that for live payments..


and also i got 600 gsm voip gateways. if anybody intrested to buy i will give a good deal gateways et me know in tis form.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 27, 2009 11:31 am 
Offline

Joined: Tue Aug 08, 2006 4:00 pm
Posts: 117
Location: Bitola,Macedonia
jroper wrote:
1. set up trunk to GSM gateway.
2. Bring incoming calls from GSM gateway into a context that launches - deadAGI(a2billing.php|1|cid-callback|34) ;last parameter is the callback area code
3. Make sure you have a context as below as well as point 2:-
Code:
[a2billing-callback]
exten => _X.,1,deadAGI(a2billing.php|1|callback)
exten => _X.,n,Hangup

4. make sure callback Daemon is running. instructions in the addon/docs folder in the tarball.
5. Make sure CID exactly as delivered is listed against your customer.

Joe


I also what to make callback with GSM gateway but i like to know are any chance Asterisk to take CID without to answer becouse i dont whant customer to be charged for ringining to GSM ?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 27, 2009 11:33 am 
Offline

Joined: Fri Jun 23, 2006 3:56 pm
Posts: 4065
Hi

You can stop asterisk answering the call - but the question is can you stop your GSM gateway from answering the call.

Joe


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 27, 2009 11:38 am 
Offline

Joined: Tue Aug 08, 2006 4:00 pm
Posts: 117
Location: Bitola,Macedonia
jroper wrote:
Hi

You can stop asterisk answering the call - but the question is can you stop your GSM gateway from answering the call.

Joe


thanks for reply will see when i get gsm gateway :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 
Hosted Voice Broadcast


All times are UTC


Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group