callback problem,as soon as I answer its hung

munirhossain · **Joined:** Wed May 05, 2010 5:49 pm **Posts:** 20

Hello,
I have a cid-callback problem. The callback is now trigger and the phone I am calling from rings but as soon as I answer the phone it hangs up. pls help

argeorge · **Joined:** Tue Jun 29, 2010 9:41 pm **Posts:** 4

check if you are missing installation of sounds

munirhossain · **Joined:** Wed May 05, 2010 5:49 pm **Posts:** 20

Hi,
Sorry i were out of town. I checked the installed sounds and all requiere sounds are installed but still hung after answer. pls any tips.
argeorge thanks for reply.

theinz · **Posted:** Tue Jul 06, 2010 6:09 pm

munirhossain wrote:

Hi,
Sorry i were out of town. I checked the installed sounds and all requiere sounds are installed but still hung after answer. pls any tips.
argeorge thanks for reply.

Hi am pretty new on this forum but i've been using A2billing for a while now. Please can you paste here your dialplan ? It could be easier for us to debug

Thanks

iamaladin · **Posted:** Fri Jul 09, 2010 9:49 am

Hi munirhossain,

Please turn debug on A2B, and goto Asterisk CLI. Then try callback again.

You will see messages. Look at these messages or post messages here.

Regards,
Nuiz

Da · **Joined:** Thu Feb 14, 2008 4:14 pm **Posts:** 22

Hi,
I have the same problem.
I have a DID 1234567366. When I call from 1XXXXXX991 to 1234567366 after several rings I hangup. After that I never get a call back to 1XXXXXX991.

I attached agi-conf5.txt
In extensions.conf I have:

[a2billing-cid-callback]
exten => _X.,1,Ringing()
exten => _X.,n,DeadAGI(a2billing.php|5|cid-callback|1) ;last parameter is the callback area code
exten => _X.,n,Wait(60)

exten => 1234567366,1,Set(CALLERID(num)=1XXXXXX991)
exten => 1234567366,n,goto(a2billing-cid-callback,${CALLERID(num)},1)

I attached CLI.txt.

Any help is appreciated.

provided by Star2Billing S.L.

callback problem,as soon as I answer its hung

Who is online