How to customize ANI Callback

ryan_mu · **Joined:** Wed Sep 15, 2010 9:09 am **Posts:** 96

Hi all,
I use A2Billing 1.7.1 and Asterisk 1.4.xx. So I have only one DID PSTN for calling card application. I have configured successfully Web callback.
I know that ANI callback :

Code:

 
- The customer call to Access number (DID). 
- Where the CID delivered to the platform, the CID is captured, and after a short period of time to allow the customer to clear down. 
- The call to the customer is initiated using the CID. 
- The customer then authenticates and is presented with secondary dial tone

Because I have only one DID PSTN, so I want to integrate ANI Callback in calling card application. The scenario is customized as following :

Code:

- The customer call to Access number (DID).  
- Where the CID delivered to the platform, the CID is captured. 
- The system said that "Please enter destination". If the customer want to use ANI Callback, they enter code dial :200 .  The call is hung up. 
- Next the system makes a call to the customer is initiated using the CID. 
- The customer then authenticates and is presented with secondary dial tone.   

How to integrate ANI Callback in calling card application with this customized scenario ?

Thank in advance for all helps!
Best regards,
Ryan.

jroper · **Joined:** Fri Jun 23, 2006 3:56 pm **Posts:** 4065

Hi

Easier to buy another DID but, you can set up an IVR where you have for callback press 1, for call through press 2, and this dial plan for the IVR either calls a2billing php in callback mode or call through mode as appropriate,

Joe

provided by Star2Billing S.L.

How to customize ANI Callback

Who is online