|unable to dial out
|Page 1 of 1|
|Author:||carlosmp [ Wed Nov 06, 2013 3:33 pm ]|
|Post subject:||unable to dial out|
Sort of at a quandry here. Our server seems to have hit a bump and won't allow outbound calls. I imported some new rates last night, and made a few changes. Every attempt looks like this:
-- Executing [15551234567@a2billing:2] AGI("SIP/runc-00000003", "a2billing.php,1") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php
-- <SIP/runc-00000003>AGI Script a2billing.php completed, returning 4
I checked the usual culprits -
- rate simulator returns rates found for number, a2billing.php, permissions, etc. seem to be ok. For safe measure reinstalled a2billing, and still nothing. Then I went back through the list of changes I made in the agi-conf1 side of things, as nothing should have changed behavior this badly.
Seems that the culprit was a blank "sip_iax_pstn_direct_call_prefix" that I edited from 555 to blank, since we use the 555 prefix for data calls, and wanted to make sure it wouldn't interfere. I changed it back to 555. leaving all the other changes and the system is working once again. I tried to change it to 1111111 to make sure it's not used, and the system is working. Perhaps a bug that we should allow a null in there? I saw one other post, that had a similar issue, and the only common thing was the blank/null setting for the sip_iax_pstn_direct_call_prefix.
Why would setting this to blank dump the call from even processing?
|Page 1 of 1||All times are UTC|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group